Poster Discussion Session. Poster Discussion Session
Wednesday 3 July 2024
4:00 pm - 5:30 pm
R0
Wednesday 3 July 2024
4:00 pm - 5:30 pm
R0
Characterization of Ultrasonic Welding Bonds in Hybrid Composites – Realisation and Feasibility of a Novel Joining Process in Aerospace Application
Niklas CHALOUPKA (GERMANY )
Niklas CHALOUPKA (GERMANY )
Topic(s) : Industrial applications
P001
P001
MULTI-SCALES STUDY OF CERAMICS COMPOSITE MATERIAL FOR AERONAUTICAL APPLICATIONS
Sébastien DENNEULIN (FRANCE )
Sébastien DENNEULIN (FRANCE )
Topic(s) : Industrial applications
P002
P002
Challenges of hydrogen composite cryogenic storage for aeronautics
Laure MORETTI (FRANCE )
Laure MORETTI (FRANCE )
Topic(s) : Industrial applications
P003
P003
Breaking the Ice: Advancements in De-Icing applications in CF/PEEK laminates with Metallic Integration and improvement in metal polymer bonding
Rishi RAJ (INDIA )
Rishi RAJ (INDIA )
Topic(s) : Industrial applications
P004
P004
Prediction of the mechanical behavior of Passenger airbag module by design factors based on deep neural network
Gyuwon KIM (KOREA, REPUBLIC OF )
Gyuwon KIM (KOREA, REPUBLIC OF )
Topic(s) : Industrial applications
P005
P005
Development of an innovative lightweight suspension arm based on Thermoplastic Resin Transfer Molding (T-RTM) for electrical vehicle.
Elena RODRÍGUEZ-SENÍN (SPAIN )
Elena RODRÍGUEZ-SENÍN (SPAIN )
Topic(s) : Industrial applications
P006
P006
SOLUBILITY CHARACTERISTICS OF GRAPHENE NANO-FILLER IN VARIOUS SOLVENTS FOR SUBMARINE CABLE PROTECTION MATERIALS
Sungwoong CHOI (KOREA, REPUBLIC OF )
Sungwoong CHOI (KOREA, REPUBLIC OF )
Topic(s) : Industrial applications
P007
P007
Design and Analysis of Wind Turbine Blade Considering on Separation of Composite Blade for Transportation
Park HYUNBUM (KOREA, REPUBLIC OF )
Park HYUNBUM (KOREA, REPUBLIC OF )
Topic(s) : Industrial applications
P008
P008
Development of high-performance bipolar plates by electrode integration for vanadium redox flow batteries
Jun Woo LIM (KOREA, REPUBLIC OF )
Jun Woo LIM (KOREA, REPUBLIC OF )
Topic(s) : Industrial applications
P009
P009
Investigation on optimal location of separation part for large scale wind turbine blade
Jeong WOOSEONG (KOREA, REPUBLIC OF )
Jeong WOOSEONG (KOREA, REPUBLIC OF )
Topic(s) : Industrial applications
P010
P010
Composite hydrogels based on modified chitosan with haemostatic and antimicrobial activity
Zoi TERZOPOULOU (GREECE )
Zoi TERZOPOULOU (GREECE )
Topic(s) : Industrial applications
P011
P011
Characterization and optimization of the forming behavior of the textile preforms by trimming
Jian HU (FRANCE )
Jian HU (FRANCE )
Topic(s) : Material science
P012
P012
APPLICATIONS OF PLASMA TREATMENT OF RECYCLED CARBON FIBRES
Jana NOVOTNÁ (CZECH REPUBLIC )
Jana NOVOTNÁ (CZECH REPUBLIC )
Topic(s) : Material science
P013
P013
Approach to reduce environmental impact of fiber reinforced plastic by using Flat glass fiber
Yosuke NUKUI (JAPAN )
Yosuke NUKUI (JAPAN )
Topic(s) : Material science
P014
P014
In-Line Drying of Glass Fibres by High Frequency Infrared Radiation
Pascal SZARKO (GERMANY )
Pascal SZARKO (GERMANY )
Topic(s) : Material science
P015
P015
Determination of reinforcing fiber fineness – comparison of measurement methods, their accuracy, advantages and limitations
Blanka TOMKOVA (CZECH REPUBLIC )
Blanka TOMKOVA (CZECH REPUBLIC )
Topic(s) : Material science
P016
P016
Experimental investigation on dry or impregnated tow mechanical behaviour under multiaxial loads
Julien VALETTE (FRANCE )
Julien VALETTE (FRANCE )
Topic(s) : Material science
P017
P017
Fabrication and Damping Capacity of Short Alumina Fiber and VGCF Hybrid Reinforced Aluminum Alloy Composites
Kazunori ASANO (JAPAN )
Kazunori ASANO (JAPAN )
Topic(s) : Material science
P018
P018
Reduction of environmental impact of epoxy resins used in composite materials
Fabrizio CAFARO (ITALY )
Fabrizio CAFARO (ITALY )
Topic(s) : Material science
P019
P019
Modification of Thermoplastic Starch with Chain Extenders to its thermal, barrier and mechanical properties
Kyeongmin KIM (KOREA, REPUBLIC OF )
Kyeongmin KIM (KOREA, REPUBLIC OF )
Topic(s) : Material science
P020
P020
Advanced lightweight of battery tray for electric vehicles (ALBATROSS Project)
Paula RODRÍGUEZ (SPAIN )
Paula RODRÍGUEZ (SPAIN )
Topic(s) : Material science
P021
P021
Change in the physical properties of plaster composites reinforced with carbon fibers.
Alžbeta SAMKOVÁ (CZECH REPUBLIC )
Alžbeta SAMKOVÁ (CZECH REPUBLIC )
Topic(s) : Material science
P022
P022
Solvent-based Multiple Cycle Recovery anReprocessability of Glass Fibre Reinforced Elium: Evaluation of Thermomechanical Properties
Shammi SHAMMI SULTANA NISHA (AUSTRALIA )
Shammi SHAMMI SULTANA NISHA (AUSTRALIA )
Topic(s) : Material science
P023
P023
A new thermoplastic matrix resin with good interfacial strength to carbon fiber reinforcements for structural composites
Jin Woo YI (KOREA, REPUBLIC OF )
Jin Woo YI (KOREA, REPUBLIC OF )
Topic(s) : Material science
P024
P024
Tannic acid: An interesting natural filler for HDPE
Alexandra ZAMBOULIS (GREECE )
Alexandra ZAMBOULIS (GREECE )
Topic(s) : Material science
P025
P025
The effect of microwave power levels on the carbon nanotubes growth over the carbon fiber surface using microwave irradiation
Mohd SHADAB ANSARI (INDIA )
Mohd SHADAB ANSARI (INDIA )
Topic(s) : Material science
P026
P026
A Python Computer Vision Approach for Crack Opening Displacement-based Fibre Bridging Evaluation in Composite Materials
Christopher SUTCU (UNITED KINGDOM )
Christopher SUTCU (UNITED KINGDOM )
Topic(s) : Material science
P027
P027
Sustainability of hybrid materials: Approaches to manufacture and characterize fiber-metal laminates with activatable interfaces
Anna TRAUTH (GERMANY )
Anna TRAUTH (GERMANY )
Topic(s) : Material science
P028
P028
Finite element analysis of micro peel test for evaluating pulp fibre interfacial adhesion
Junaid ZUBAIR (FINLAND )
Junaid ZUBAIR (FINLAND )
Topic(s) : Material science
P029
P029
Influence of the prepreg morphology on the properties of OOA consolidated composites
Karine LABASTIE (FRANCE )
Karine LABASTIE (FRANCE )
Topic(s) : Material science
P030
P030
The use of black tea waste as a thermo-oxidation stabilizer for polyethylene composites in rotational molding technology
Joanna ANIŚKO (POLAND )
Joanna ANIŚKO (POLAND )
Topic(s) : Material science
P031
P031
Resources from sustainable land use for natural fibre composite injection moulding
Jonas-Rumi BAUMANN (GERMANY )
Jonas-Rumi BAUMANN (GERMANY )
Topic(s) : Material science
P032
P032
Towards improving the fibre-matrix adhesion in oleaginous flax fibre polylactide (PLA) composites
Alexander BEHRENS (GERMANY )
Alexander BEHRENS (GERMANY )
Topic(s) : Material science
P033
P033
Polymeric biocomposites from cactus pear by-products: utilizing glochids and peel for sustainable materials
Luigi BOTTA (ITALY )
Luigi BOTTA (ITALY )
Topic(s) : Material science
P034
P034
Preparation of a bio-inspired halogen-free flame retardant containing sugarcane bagasse, phosphorus and nitrogen through a hydrothermal method and its application in epoxy resin
Chin-Lung CHIANG (TAIWAN )
Chin-Lung CHIANG (TAIWAN )
Topic(s) : Material science
P035
P035
Bacterial cellulose from side-streams of Kombucha fermentation as sustainable bio-based reinforcement in thermoplastic-matrix composites
Edoardo EDOARDO ZONTA (ITALY )
Edoardo EDOARDO ZONTA (ITALY )
Topic(s) : Material science
P037
P037
On the biobased compatibilizer for improvement of thermal resistance of recycled polypropylene composites with lignocellulosic fibers from agricultural residues
ZICĀNS Jānis (LATVIA )
ZICĀNS Jānis (LATVIA )
Topic(s) : Material science
P038
P038
First-principles study on the mechanical properties of citric acid-modified cellulose composite polymeric materials
Takeru KOMYO (JAPAN )
Takeru KOMYO (JAPAN )
Topic(s) : Material science
P039
P039
Common reed as novel Biosource composite production
Paula LINDERBÄCK (FINLAND )
Paula LINDERBÄCK (FINLAND )
Topic(s) : Material science
P040
P040
Multiscale Natural Fiber-Reinforced Thermoplastic Composites Towards Enhanced Mechanical Performance
Luís NOBRE (PORTUGAL )
Luís NOBRE (PORTUGAL )
Topic(s) : Material science
P041
P041
Change in dynamic-mechanical properties of PLA film due to UV radiation
Miroslava PECHOČIAKOVÁ (CZECH REPUBLIC )
Miroslava PECHOČIAKOVÁ (CZECH REPUBLIC )
Topic(s) : Material science
P042
P042
Influence of the number of plies on the Stiffness of Laminated Veneer Lumber
Axel PEIGNON (FRANCE )
Axel PEIGNON (FRANCE )
Topic(s) : Material science
P043
P043
Saxophone and clarinet reeds, made from bio-based materials in a thermoplastic pultrusion process
Lars WOLLERT (GERMANY )
Lars WOLLERT (GERMANY )
Topic(s) : Material science
P044
P044
FUNCTIONALIZED CARBON NANOMATERIALS IN CEMENT, A MULTIVARIATE APPROACH
Carlo AMATA (ITALY )
Carlo AMATA (ITALY )
Topic(s) : Material science
P045
P045
DEVELOPMENT AND STUDY OF LAMINATED COMPOSITE MATERIAL INTEGRATING CARBON NANOTUBES FOR LAUNCHER CRYOGENIC TANK APPLICATION
Adrien BOISSENIN (FRANCE )
Adrien BOISSENIN (FRANCE )
Topic(s) : Material science
P046
P046
DEVELOPMENT AND THERMOMECHANICAL CHARACTERIZATION OF THERMOPLASTIC NANOCOMPOSITES BASED ON THE IN-SITU ANIONIC POLYMERIZATION OF POLYAMIDE 6
Lorenzo BROGGIO (ITALY )
Lorenzo BROGGIO (ITALY )
Topic(s) : Material science
P047
P047
Carbon nanofiber composites doped with different ZIF-8 nanoparticles for carbon dioxide capture
Yu-Chun CHIANG (TAIWAN )
Yu-Chun CHIANG (TAIWAN )
Topic(s) : Material science
P048
P048
Effect of Carbon Black as a Conductive Filler on The Electrical, Thermal and Mechanical Property of Epoxy
Bibhuti Bikash KAGYUNG (INDIA )
Bibhuti Bikash KAGYUNG (INDIA )
Topic(s) : Material science
P049
P049
MXenes Embedded PLA Nanocomposites for Challenging Versatile Applications
Vasileios TZATZADAKIS (GREECE )
Vasileios TZATZADAKIS (GREECE )
Topic(s) : Material science
P050
P050
Characterizing the mechanical behaviors of graphene nanocomposites using molecular dynamics simulation
Jia-Lin JIA-LIN TSAI (TAIWAN )
Jia-Lin JIA-LIN TSAI (TAIWAN )
Topic(s) : Material science
P051
P051
Surface functionalized pyrolytic carbon composites for wastewater treatment
Pustahija LUCIJA (AUSTRIA )
Pustahija LUCIJA (AUSTRIA )
Topic(s) : Material science
P052
P052
Tailored Hybrid Composite Preforms by Automated Fibre Placement of Powder Epoxy-Based Towpregs
Murat ÇELIK (UNITED KINGDOM )
Murat ÇELIK (UNITED KINGDOM )
Topic(s) : Material science
P053
P053
Advanced Polyethylene Terephthelate (PET) Aerogels and their Composites from Plastic Waste for Load Bearing Thermal Insulation and Radiative Cooling Applications
Xue Yang GOH (SINGAPORE )
Xue Yang GOH (SINGAPORE )
Topic(s) : Material science
P054
P054
INFLUENCE OF THE USE OF ADDITIVE PHASE CHANGE MATERIALS IN THE MATRIX OF FIBRE COMPOSITES ON THE ABLATIVE PROPERTIES
Robert SZCZEPANIAK (POLAND )
Robert SZCZEPANIAK (POLAND )
Topic(s) : Material science
P055
P055
Novel tubular auxetic metamaterial for energy absorption applications
Ibrahim H. ZAINELABDEEN (UNITED ARAB EMIRATES )
Ibrahim H. ZAINELABDEEN (UNITED ARAB EMIRATES )
Topic(s) : Material science
P056
P056
Advancements in MWCNT-Enhanced Porous Thermoplastic Elastomeric Composite Foam for Electromagnetic Radiation Suppression
Jasomati NAYAK (INDIA )
Jasomati NAYAK (INDIA )
Topic(s) : Material science
P057
P057
The manufacturing of auxetic and conductive foam composites utilizing a novel kinetic model
Yoon Min OH (KOREA, REPUBLIC OF )
Yoon Min OH (KOREA, REPUBLIC OF )
Topic(s) : Material science
P058
P058
Evaluation on ablation behavior of ZrO2 nanoparticle-dispersed porous carbon composites
Hiroya TANIGUCHI (JAPAN )
Hiroya TANIGUCHI (JAPAN )
Topic(s) : Material science
P059
P059
MODELLING THE INFLUENCE OF PART GEOMETRY, STACKING SEQUENCE, AND LOADING RATE ON THE ENERGY ABSORPTION OF OPEN NON-CRIMP FABRIC COMPOSITE CHANNELS
Valerie AJAYI (CANADA )
Valerie AJAYI (CANADA )
Topic(s) : Material and Structural Behavior - Simulation & Testing
P060
P060
Numerical and Experimental Investigation of Mechanical Behavior of Carbon and Glass Fiber Reinforced Composites and Honeycomb Sandwich Panels and its application in MALE UAV Wing Skin
Fahad ALI (PAKISTAN )
Fahad ALI (PAKISTAN )
Topic(s) : Material and Structural Behavior - Simulation & Testing
P061
P061
CHARACTERIZATION OF FATIGUE-DRIVEN DELAMINATION IN MODE II
Ainhoa ARRESE (SPAIN )
Ainhoa ARRESE (SPAIN )
Topic(s) : Material and Structural Behavior - Simulation & Testing
P062
P062
THE INFLUENCE OF THE CRUSH PLUGS ON THE ENERGY ABSORPTION OF CARBON/EPOXY COMPOSITE CIRCULAR TUBES UNDER AXIAL CRUSHING
Serdar DEMIR (TURKEY )
Serdar DEMIR (TURKEY )
Topic(s) : Material and Structural Behavior - Simulation & Testing
P063
P063
Annealing Effects on Mechanical Performance and Failure Characteristics of CF/PEKK Aerospace Composites: A Thorough Exploration
Sinem ELMAS (TURKEY )
Sinem ELMAS (TURKEY )
Topic(s) : Material and Structural Behavior - Simulation & Testing
P064
P064
Finite element modelling of composite materials under impact loading, challenges and potential ways forward.
Sakineh FOTOUHI (FRANCE )
Sakineh FOTOUHI (FRANCE )
Topic(s) : Material and Structural Behavior - Simulation & Testing
P065
P065
Demonstration of preventing catastrophic compressive failure of carbon fibre-based composite components under 3-point bending through lay-up configuration control.
Ellis HILL (UNITED KINGDOM )
Ellis HILL (UNITED KINGDOM )
Topic(s) : Material and Structural Behavior - Simulation & Testing
P066
P066
Experimental study of adhesive layer effect on Mode-II interlaminar fracture toughness in unidirectional Glass Fiber/Epoxy composite and Mode-I fracture toughness at the 0/90-degree interface
Sasan KARIMI (TURKEY )
Sasan KARIMI (TURKEY )
Topic(s) : Material and Structural Behavior - Simulation & Testing
P067
P067
Translaminar fracture behavior of hybrid woven-ply PEEK thermoplastic laminates under isothermal and kerosene flame exposure
Lanhui LIN (FRANCE )
Lanhui LIN (FRANCE )
Topic(s) : Material and Structural Behavior - Simulation & Testing
P068
P068
Analysis of size effects on open-hole strength of composite laminates under combined tension-shear loading- Numerical study
P MAHESH (INDIA )
P MAHESH (INDIA )
Topic(s) : Material and Structural Behavior - Simulation & Testing
P069
P069
The effect of pattern width on the properties and behavior of interfacially engineered composites with designed failure
Gergő Zsolt MARTON (HUNGARY )
Gergő Zsolt MARTON (HUNGARY )
Topic(s) : Material and Structural Behavior - Simulation & Testing
P070
P070
Process simulation chain combined with a structural simulation to capture the actual process-induced effects and ‘as-built’ characteristics
Maximilian POLLAK (AUSTRIA )
Maximilian POLLAK (AUSTRIA )
Topic(s) : Material and Structural Behavior - Simulation & Testing
P071
P071
On the transverse shear failure in unidirectional fibre-hybrid composite laminae using periodic microstructures
Giuseppe GIUSEPPE ROMANO (UNITED KINGDOM )
Giuseppe GIUSEPPE ROMANO (UNITED KINGDOM )
Topic(s) : Material and Structural Behavior - Simulation & Testing
P072
P072
Numerical Modelling and Experimental Comparison of a Tensile Test on Flax Roving
Tiffany LARQUEMIN (FRANCE )
Tiffany LARQUEMIN (FRANCE )
Topic(s) : Material and Structural Behavior - Simulation & Testing
P073
P073
The research of the residual stress influence on unidirectional composite materials mechanical properties through micromechanical analysis.
Qingchuan LIU (CHINA )
Qingchuan LIU (CHINA )
Topic(s) : Material and Structural Behavior - Simulation & Testing
P074
P074
DESIGN AND DAMAGE ASSESSMENT IN EARTHQUAKE RESISTANT COMPOSITE PIPE JOINTS
Kaveh SHAHIDI (TURKEY )
Kaveh SHAHIDI (TURKEY )
Topic(s) : Material and Structural Behavior - Simulation & Testing
P075
P075
Mechanical characterization of hybrid reinforced polypropylene composites with talc fillers and cellulose nanofibers
Tatsuto YAMAMOTO (JAPAN )
Tatsuto YAMAMOTO (JAPAN )
Topic(s) : Material and Structural Behavior - Simulation & Testing
P076
P076